EasyManua.ls Logo

Vertex Standard VX-410 Series - Specifications

Vertex Standard VX-410 Series
63 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Specifications
GENERAL Specifications
Frequency Range: 146 - 174 MHz
Number of Channels: 32 (16+16) channels
Number of Groups: 2 groups
Channel Spacing: 12.5 / 20 / 25 kHz
PLL Steps 2.5 / 6.25 kHz
Operating Voltage: 7.5 VDC ± 20%
Battery Life ( w/ save): 12.5h (16h) w/ FNB-V67LI
(Rx 5 : Tx 5 : STBY 90 Duty) 7h (8.8h) w/ FNB-V57
Temperature Range: –22°F to +140°F (–30°C to +60°C)
Frequency Stability: ±2.5 ppm
Dimensions (WHD): 2.3" x 4.3" x 1.2" (58 x 18.5 x 30 mm) w/FNB-V67LI
Weight (approx.): 10.6 oz (300g) w/Ant. Battery (FNB-V67LI) and Belt Clip
RECEIVER Specifications (Measurements made per TIA/EIA-603)
Sensitivity (12 dB SINAD) : 0.25 µV
Adjacent Channel Selectivity (W/N) : 70 / 65 dB
Intermodulation (W/N): 70 dB
Spurious and Image Rejection: 70 dB
Hum and Noise (W/N) : 45 / 40 dB
Audio output: 500 mW @4 Ohms, 5% THD
TRANSMITTER Specifications (Measurements made per TIA/EIA-603)
Power output: 5 / 1 W
Modulation (W/N): 16K0F3E, 11K0F3E
Spurious Emissions: 70 dB
FM Hum and Noise Analog (W/N): 45 / 40 dB
Audio Distortion: Less than 3% @ 1 kHz
Measurements per EIA standards unless noted above. Specifications subject to change without notice or obligation.

Other manuals for Vertex Standard VX-410 Series

Related product manuals