Vertex VX-6R - Page 15

15
Alignment
TX Deviation Adjustment (DEU) [62] (USA version only)
P Press the
[
V/M
]
button, then inject a 1 kHz audio tone at
a level of 50mV (rms) to the MIC jack. Press the
[
V/M
]
button, then transmit and adjust the deviation for 4.2
kHz ±0.2 kHz by rotating DIAL, then press the
[
V/M
]
button. Rotate the DIAL to select the next setting.
CTCSS Tx Deviation Adjustment (100) [29] (USA version
only)
P Press the
[
V/M
]
button, then transmit and adjust the de-
viation for 0.6 kHz ±0.05 kHz by rotating DIAL, then
press the
[
V/M
]
button. Rotate the DIAL to select the next
setting.
DCS Tx Deviation Adjustment (DCS ) [30] (USA version
only)
P Press the
[
V/M
]
button, then transmit and adjust the de-
viation for 0.8 kHz ±0.05 kHz by rotating DIAL, then
press the
[
V/M
]
button.
This completes the internal alignment routine for all bands.
To save all settings and exit, press the
[
HM/RV
]
button.