Need help?Do you have a question about the Vertex FTL-1011 and is the answer not in the manual?
General| Number of channels | 1 |
|---|---|
| Form Factor | SFP |
| Data Rate | 1.25 Gbps |
| Wavelength | 1310 nm |
| Transmission Distance | 10 km |
| Connector Type | LC |
| Operating Temperature | 0 to 70°C |
| Power Supply Voltage | 3.3V |
| DDM/DOM Support | Yes |
Details on microphone jack and MON/Accessory buttons/indicators on the front panel.
Connects the microphone to the transceiver for communication.
Controls squelch modes (noise, tone/coded) and indicates status.
Activates noise blanker or other functions like power selection.
Adjusts receiver volume and powers the transceiver on/off.
Indicates channel busy (green) or transmission (red).
Connects the supplied fused DC power cable for operation.
Connects the 50-ohm coaxial feedline to the antenna.
Guides on powering on, channel selection, and coded squelch control.
Turn on the radio, select channels via button or knob based on model.
To Next Page
