Maintenance And Service
Keep the outside of the transceiver clean by wiping with a soft
cloth as necessary. Avoid rain or immersion in water, and protect
the radio from dust as much as possible. Do not open the case. If the
radio fails to operate, check the cable connections, and inspect the
fuses in the
DC
cable.
Regular Maintenance Plan
Your Yaesu dealer will advise you of the maintenance plan that
best suits your needs. We recommend that the transceiver be re-
turned to your Yaesu dealer at least once every two years, for
testing of receiving sensitivity and transmitter power output. If the
need for servicing does arise, phone your Yaesu dealer for an
appointment.
He
will be pleased to answer any service-related
questions, and his qualified service technicians will make sure that
your radio is back in service as quickly as possible.
Fuse Replacement
If a fuse is blown try to determine if the failure was caused by
something outside of the radio (like
a
short circuit due to a worn
cable). Contact your dealer at once if you do not find the cause.
Replace fuses only with the same type installed.
Service Information
If the transceiver fails to operate, check the fuses in the power
cable. If either is blown, attempt to locate and correct the cause of
the problem before replacing the
fuse(s). These radios have no
user-serviceable parts inside.
Caution
when replacing fuses,
2
correc ow>
and rating (IOA, or
15A
f
-1011). ting
from use of an improper fuse
1s not covered
by
warranty.
use thc
'or
FTL
:t type
Damag
.
.
(fast-bl
;e resul
page
12
To Next Page
Loading...
Need help?
General
