Vertex FTL-1011 User Manual

Vertex FTL-1011, FTL-2011 & FTL-7011 Operating Manual
A A
Base Station Installation
The FP-711 AC Power Supply can operate the transceiver from a
variety of AC voltages. Connect the fused DC Cable supplied with
the transceiver to the terminals on the rear of the
FP-711.
NOTE: In all installations, means must be provided to ground the
metal mounting loop on the microphone in order for the squelch
and
scanning/monitoring systems to function. In base installa-
tions, a grounding hook must be provided in which to rest the
microphone when not transmitting.
Power Connections
For mobile installations, connect the power cable directly to the
vehicle battery. This allows the radio to operate without turning on
the ignition, and may also reduce noise in the receiver. Connection
Perma
revers
b
ution!
power r is
-- ---
revers ed pow
Image v
r warra
vill resu
nty doc
er supp
.It if the
.^ -,.A -
ections.
page 10

Vertex FTL-1011 Specifications

General

Brand	Vertex
Model	FTL-1011
Category	Transceiver
Language	English