Vertical Power VP-X Pro - 4.8 a Over-voltage Planning; 4.8 b Low-voltage Planning; 4.9 Landing Light Wig-Wag (Pulsing) Considerations; 4.10 HID Light Considerations

VP-X Installation and Operating Manual
Rev. D (August 5, 2020) Page 6
Change Log
Change Date Revision Change
Aug 26, 2010 Initial public release
Oct 27, 2011 Added Rotax and Jabiru alternator section.
Nov 3, 2011 Added dimension drawings to Appendix.
Dec 13, 2011 Added pinout diagrams in Appendix.
Feb 6, 2012 Added more detail on EFIS data wiring. Added
strobe and AeroLED diagrams.
Feb 20, 2012 Fixed label on Option 2 dual battery diagram.
May 16, 2012 Added clarication about connecting serial data
line to GRT EFIS.
July 12, 2012 Updated dual battery drawings: moved
contactor diode placement.
Aug 20, 2012 Updated ap troubleshooting section. Updated
DualBuss Technology section.
Dec 1, 2012 Added RV-10 ap reex and continuous aps
features. Primary alternator disable feature. 1.4
rmware update.
Feb 27, 2012 Added Eagle EMS and updated IBBS section.
May 3, 2013 Added GSA 28, minor corrections.
May 15, 2013 Added section on advice for planning electrical
system.
June 24, 2013 Added guidance for HID lights.
July 24, 2013 Added note about ap circuit breaker value and
newer VP-X.
Sept 25, 2013 Added second option for wiring starter
annunciator.
Sept 26, 2013 Added more alternator switch wiring options.
Nov 22, 2013 Added section on dual-function switches.
Aug 28, 2014 B Added Trio Auto Trim, moved warranty to
separate document, updated style, minor
corrections.
May 18, 2017 C Added additional info about the TCW IBBS.
Phantom voltage info. Updated Installing
Terminals images. Removed Subaru and Viking
engine appendices.
Change Date Revision Change
Aug 5, 2020 D General manual update with multiple
corrections and additions. Added references to
the Vertical Power PPS.