Release 1.0 SUMMIT IP Station User Guide April 2014
To toggle between the name and number display
1. Press the [TRANS/PGM] button.
To program your Station User Name
1. Press the [TRANS/PGM] button.
2. Dial “071”, the Attendant User Name Program code. (Attendant Only)
3. Dial the Station number.
4. Dial the name, up to 12 characters; refer to Station Speed Dial for The Character Entry
Chart.
5. Press [HOLD/SAVE].
Conditions
1. Available characters are A to Z, space and period.
2. The LCD will display multiple names, one per LCD line up to 12 characters.
3. If you select a directory with no entries or there is no match to the entry, the “No
Entries” message is displayed and error tone is provided.
4. Dial-by-Name is only available to iPECS IP and LDP Phones with a display. Other
users will receive error tone if an attempt is made to access Dial-by-Name.
5. You may both scroll and enter characters to search a directory
To Next Page
Loading...
