Vertical SUMMIT IP Phone - Sending and Receiving Short LCD Messages

Release 1.0 SUMMIT IP Station User Guide April 2014
Sending and Receiving Short LCD Messages
3-3
Chapter 3: SEND & RETRIEVE MESSAGES
Sending and Receiving Short LCD Messages
The Short Message Service (SMS) provides the ability to send and receive text messages to
and from iPECS IP and LDP Phones equipped with a display as well as the Phontage, UCS
Client and WLAN Phone. The text is comprised of words, numbers, or an alphanumeric
combination. Each short message can be up to 100 characters in length when Latin
alphabets are used
To resend an existing SMS message;
1. Press the [TRANS/PGM] button.
2. Dial “36”, the SMS send code.
SMS SENDING MODE
RESEND-(1) EDIT-(2)
3. Dial “1” to resend a message.
DIAL STA DEST(XXX-XXX)
SKIP-(*)
4. Dial the desired station range to receive the message or “*” to use the
displayed station range.
STA 100-124
SEND-(SAVE) CANCEL-(#)
5. Press the [HOLD/SAVE] button to send the message or “#” to cancel.
To send a new message
1. Press the [TRANS/PGM] button.
2. Dial “36”, the SMS send code.
SMS SENDING MODE
RESEND-(1) EDIT-(2)
3. Dial “2” to send a new message.
DIAL STA DEST(XXX-XXX)