To deactivate Call Forward, Remote:
1. Lift the handset,
2. Press the Fwd Soft button,
3. Dial 0 (Remote Call Forward code),
4. Dial your Authorization code (Station number & Password),
5. Press the # key.
Forwarding calls to an external number
Forward calls to an external destination; calls can be forwarded from an internal station
or a remote location. You may define the conditions or 'type of forward' as listed below:
- 1: Unconditional - all calls to the station, except recalls, are forwarded.
- 2: Busy - Immediately forwards all calls to the station, except recalls, when station
is busy.
- 3: No Answer - forwards all calls to the station, except recalls, when the station
does not answer within the No Answer timer.
- 4: Busy/No Answer - forwards calls if the station is busy or does not answer within
the No Answer timer.
When you forward calls from a different station or a remote location, you may need to
enter your Authorization Code. In addition, from a remote location, you must access the
system through a DISA enabled CO line.
To activate Call Forward, Off Premise (forward to an external number) from your phone:
1. Lift the handset,
2. Press the Fwd Soft button or dial 554
3. Dial the type of Forward code (1-4),
4. Dial Telephone number,
5. Replace the handset, return to idle.
To activate Call Forward, Off Premise (forward to an external number) from a different phone:
1. Lift the handset,
2. Press the Fwd Soft button or dial 554,
3. Dial 0 (Remote Call Forward code),
4. Dial your Authorization code (your Station number + Password),
5. Dial the type of Forward code (1-4),
6. Dial Telephone number,
7. Replace the handset, return to idle.
To Next Page
Loading...
