Vertical SUMMIT IP Phone - Call Park

Release 1.0 SUMMIT IP Station User Guide April 2014
Call Park
5-2
Chapter 5: MISC FEATURES
Call Park
Placing a call on Hold to Page
A user may transfer an active CO/IP call to a special holding location (Park Orbit), which can
be accessed easily from any station in the system. Typically, this feature is used with Paging
to notify the desired user of a parked call.
Parked calls are subject to Hold Recall after the Call Park timer.
To park an active external call:
1. Press TRANS/PGM,
2. Dial the Park Orbit number (601~619)
3. Return to idle.
To retrieve a parked call:
1. Lift the handset,
2. Dial the Park Orbit number (601~619)
SLT
To park an active external call
1. Momentarily press the hook-switch.
2. Dial the Park Orbit number (601~619).
3. Return to idle.
To retrieve a parked call
1. Lift the handset.
2. Dial the Park Orbit number (601~619).
Call Log
Users can view a log of incoming, outgoing and missed calls on the display (up to 99
records). A CALL LOG Flex button provides simple access to incoming (called), outgoing
(dialed) and missed (lost) calls.