STA 100-124
SEND-(SAVE) CANCEL_(#)
5. Dial the message using two digits for each character as shown in the table , the
character chart, use the [REDIAL] button to delete a character.
6. Press the [HOLD/SAVE] button to send and store the message or “#” to cancel.
To retrieve SMS Messages:
1. Press [MSG] or [CALL BACK] button. The message contents summary will be shown
as below.
ST CL VS VM FS MS
001 001 005 006 001 004
2. Dial “6” to select MS, SMS message wait.
“1” => ST: Station Message wait,
“2” => CL: CLI Message wait
“3” => VS: Integrated Voice message wait
“4” => VM: external Voice Mail
“5” => FS: Feature server
“6” => MS: SMS message wait.
The display shows the first line of received SMS messages
3. Use the [VOL UP]/[VOL DOWN] to scroll through messages.
MESSAGE: [0] EMERGENCY CONFER
[1] LETS GO TO LUNCH
4. Dial the message number (“01”~“10”) to view the entire message, use the [VOL
UP]/[VOL DOWN] to view each line of the message.
MESSAGE: [2] WE HAVE A MEETING A
[3] CONFERENCE AT 9 AM
To Next Page
Loading...
