Installation
Vertiv | Liebert CRD10 | User Manual 25
2.9 Refrigerant Charging Requirement
The CRD10 unit has a specifically designed air conditioning system that requires a desired pre-specified
quality of refrigerant (R410A) to perform continuously at the most optimum efficiency. For the details on the
quantity of refrigerant to be charged inside the system please refer to the installation section.
NOTE: Do not use refrigerant of inferior quality, Vertiv does not assume responsibility for warranty or any
consequences resulting from using inferior quality refrigerant.
2.10 Inspection
NOTES:
• To ensure that everything is in its designated position and that the entire product assembly is intact,
check the system fittings and their components against the packing list.
• Check that the fittings are complete and the components are intact against the packing list. Please
report immediately to the carrier’s local offices and Vertiv if any parts are missing or damage is found.
To Next Page
Loading...
Need help?
General
