Micro-Controller
Vertiv | Liebert CRD10 | User Manual 81
Figure 6-14 Hum Setting
6.8 Parameter Setting
Select Parameter Setting from the main menu to enter the interface as shown in Figure 6-15, including
teamwork setting, alarm setting, alarm attribute, communication setting, time setting, display setting,
password setting.
•
Teamwork Setting
The teamwork Setting menu interface is shown in Figure 6-15. System setting screen, the system
parameters can be set to monitoring protocol, baud rate monitoring address, date and time, the display
monitor address.
Figure 6-15 Teamwork Setting
To Next Page
Loading...
