TABLE OF CONTENTS
1 Introduction 5
1.1 Designed to Match Computer and Electronic Equipment Needs—From Installation to Operation 5
2 Standard Features—2 & 3 Ton Systems 7
2.1 Evaporator Section - Split Systems 7
2.2 Condensing Unit Section—Split Systems 7
2.2.1 Indoor Centrifugal Fan Condensing Units 7
2.2.2 Outdoor Prop Fan Condensing Units 7
2.2.3 Indoor Water/Glycol Condensing Units 7
2.3 Chilled Water Units 7
2.4 System Controls 8
2.4.1 Other Standard Control Features 8
3 Optional Factory-Installed Features—Evaporator/Chilled Water Units 9
3.1 Reheat 9
3.2 Humidifier 9
3.3 Sensors 9
3.4 Switches and Motors 9
3.5 Free-Cooling 10
3.6 Optional Configurations—Prop Fan Condensing Units 10
3.7 Optional Configurations—Water/Glycol Condensing Units 11
3.8 Optional Configurations—Chilled Water Units 11
4 Ship-Loose Accessories—Field-Installed 13
4.1 Remote Monitoring, Autochangeover, and Leak Detection Equipment 13
5 Flexible Configurations 15
6 Air-Cooled Systems—Capacities and Dimensions 17
7 Water/Glycol Systems—Capacities and Dimensions 29
8 Chilled Water Systems—Capacities and Dimensions 39
9 Electrical Data 45
10 Refrigerant Piping 59
11 Glycol Loop Piping 63
12 Model Number Nomenclature—All Systems 65
Appendices 69
Appendix A: Guide Specifications for Liebert Mini-Mate2 - 2- and 3-Ton 69
Vertiv | Liebert Mini-Mate2—2 and 3 ton Technical Data Manual | 3
To Next Page
Loading...
