Vertu Ti - Data Transfer and Hotspot; Copying Files Between Phone and PC; Tethering and Portable Hotspot; Near Field Communication (NFC)

3. Drag the status bar down and touch Connected as a media device. Make sure the Media
device (MTP) or Camera (PTP) check box is selected.
4.
Follow the prompts on your computer to sync your digital media files.
When the sync has finished, disconnect the USB cable.
Note: Always use the Vertu microUSB cable supplied with your phone.
Copy between the phone and a PC
Note: When you connect your phone for first time, your computer may prompt you that drivers are being
installed. Complete the driver installation.
1.
Connect the microUSB cable from your phone's microUSB connector to a USB connection on your
computer.
2.
From the home screen, check that appears in the status bar.
3. Drag the status bar down and touch Connected as a media device. Make sure the Media
device (MTP) check box is selected.
4.
On your computer, navigate to the removable disk showing your phone and open the Internal
Storage.
5.
Drag and drop files between your computer and the phone Internal Storage folders, such as
'Music', 'Pictures' or 'Movies'.
6. When you have finished, disconnect the USB cable.
Tethering and portable hotspot
You can 'tether' your phone to your computer, via a USB cable or a WLAN or Bluetooth connection, so that
the computer can share the phone's internet connection.
To read about the tethering options, touch Settings > More... > Tethering & portable hotspot.
NFC
Near Field Communication (NFC) allows you to beam information (such as contacts, photos and browser
pages) by bringing your phone close to another NFC-capable device (typically back to back).
From the home screen, touch Apps > Settings > More... >NFC and make sure the check box
is selected. Touch Apps > Settings > More... >Android Beam, touch OFF and drag it to the
right.
Connectivity
© 2013 Vertu Corporation Limited. All rights reserved. 55