Verve 6700 - File Transfer via Windows Explorer; Drag-and-Drop File Transfer

For further help on using Windows Media® Player, please
refer to the Help section of the program
In Windows® XP and when Windows Media Player 10 is
installed, the player is connected to the computer in MTP
mode. In the Windows Explorer, when the player is opened,
the “Data” and “Media” views will be displayed for the
player.
The Data folder is used to manage data contenton the
player, such as text files. The Media folder is used to
manage media content supported by the player for
playback, such as mp3 and wma.
You can copy files to the player through Windows Explorer
(drag-and-drop). Picture files can be copied to either
“Media” or “Data” folder for viewing while video files can
not be dragged and copied to the “Media” folder directly as
only. SMV files are supported. The video files must be
converted and transferred via VERVE Video.
Converter for playback (refer to page 19). Alternatively,
you can transfer the converted video files to the “Data”
folder via the Windows Explorer (drag-and-drop).
You can copy files to / delete files from the player through
Windows Explorer (drag-and-drop), but you cannot open
or edit the files directly from the player. If you want to edit
the files, you will need to copy the files from the player to
Transferring files via Windows Explorer (Drag-and-
Drop)
In Windows® XP (with Windows Media Player 10
installed)
3.Click Start Sync to transfer the content.
28