VESDA VESDA-E VEP-A00 - Page 79

VESDA-EVEP-A00-P Product Guide
www.xtralis.com 73
Parameter Default Values Range Affected by Return to
Factory Defaults
command
Minimum Maximum
GPI Function
(Monitored)
Mains OK n/a n/a Yes
Button Lockout Unchecked Unchecked Checked Yes
Relays
Assignment of Relays
to conditions
See Table4-2 n/a n/a Yes
Normally Energized See Table4-2 n/a n/a Yes
Latching Checked Unchecked Checked Yes
Beep Unchecked Unchecked Checked Yes
AutoLearn Smoke and Flow Commands
Duration 14 days 15 minutes 16 days n/a
Table5-4: Default Settings (continued...)
1
The Xtralis VSC software forces the user to move the detector to a valid zone number.
2
The user must set the password the first time. There is no default password.
3
Default value set in factory. Not modified by return to factory defaults command.
4
The WiFi Security Key type depends on the WiFi security method in use.
5
Pipes in Use can not be configured for VEP-A00-1P.
6
Aspirator Speed can not be configured for VEP-A00-1P.