Need help?Do you have a question about the VESDA VESDA-E VES-A00-P and is the answer not in the manual?
Details the key capabilities and characteristics of the VESDA-E VES-A00-P detector.
Identifies detector parts and explains the air sampling and detection process.
Describes the status LEDs and control buttons on the detector's front panel.
Details internal buttons and physical ports (USB, Ethernet, WiFi) for connecting.
Explains VESDAnet network capabilities and the detector's role within it.
Lists detailed technical data, including power, dimensions, operating conditions, and performance metrics.
Provides detailed diagrams and measurements for the detector's physical size and mounting.
Key points for designing and installing the sampling pipe network, including pipe inlets.
Guidance on correctly routing the exhaust air from the detector, including using adaptors.
Steps to prepare the detector before mounting, including removing tape and plugs.
Instructions for mounting the detector using brackets or templates, including orientation options.
Details on connecting power, network, and relay cables using appropriate ports and glands.
Configuration steps for VESDAnet, Ethernet, and WiFi connectivity for system integration.
Explains how to wire and configure relays and General Purpose Inputs (GPIs) for system signaling.
Procedure for applying power, initial checks, and installation checklist.
Steps for a basic system check after installation but before full commissioning.
Steps for establishing communication between Xtralis VSC software and the detector via various methods.
Procedures for setting passwords, user access, and issuing detector commands.
Settings for identification, network, detection thresholds, airflow, filter, sectors, referencing, and GPIs.
Assigning alarm/fault conditions to relays and configuring their latching and beep behavior.
Details the default values for various detector parameters and how they are affected by factory resets.
Procedures for the detector to learn its environment and set optimal smoke and airflow thresholds.
Procedure for verifying pipe network integrity and measuring smoke transport time.
How to enter standby mode and open the detector's front door for maintenance.
Guides for replacing the filter, aspirator, chamber, sampling module, and ultrasonics module.
Procedure for safely removing the detector's front fascia for access to internal parts.
A list of available field-replaceable internal components and their order numbers.
How faults are reported via relays and diagnosed using Xtralis VSC software.
Security measures for network connections, access, passwords, and system updates.
Forms for recording detector configuration, ASPIRE data, smoke tests, and air sampling results.
Definitions of key terms and acronyms used throughout the VESDA-E VESDA-A00-P Product Guide.
General| Brand | VESDA |
|---|---|
| Model | VESDA-E VES-A00-P |
| Category | Smoke Alarm |
| Language | English |
To Next Page