VESDA-EVES-A00-P Product Guide
www.xtralis.com 1
Table of Contents
1 Introduction 3
1.1 Features 3
2 Product Information 5
2.1 Detector Components 5
2.2 How the VES-A00-P works 5
2.3 Front Panel 6
2.4 Internal Buttons 7
2.5 Communication Ports 7
2.6 VESDAnet 8
2.7 Specifications 9
2.8 Dimensions 11
3 Pipe Network Design and Installation 15
3.1 Design Considerations 15
3.2 Installation Considerations 15
3.3 Pipe Inlets 15
3.4 Managing the Exhaust Air 16
4 Installation 17
4.1 Prepare the Detector 17
4.2 Mounting 18
4.3 Wiring 33
4.4 Powering Up 41
4.5 Installation Checklist 42
4.6 Preliminary System Check 43
5 Configuration 45
5.1 Communication between Xtralis VSC and the detector 45
5.2 Connecting to the Detector 49
5.3 Authentication 52
5.4 Commands 53
5.5 Configuration Options 56
5.6 Factory Default Settings 71
6 Commissioning 75
6.1 AutoLearn Smoke 76
6.2 AutoLearn Flow 77
6.3 Commissioning Smoke Test 77
7 Maintenance 79
7.1 Standby 79
7.2 Open the Door 80
7.3 Replacing the Filter 81
7.4 Remove the Fascia 84
7.5 Replacing the Aspirator 86
7.6 Replacing the Smoke Detection Chamber 88
7.7 Replacing the Sampling Module 93
7.8 Replacing the Ultrasonics Flow Sensing and Scanning Module 98
7.9 Spare Parts 101
8 Troubleshooting 103
8.1 Fault Reporting through Relays 103
8.2 Troubleshooting with Xtralis VSC 103
9 Product Security Advice 105
A Commissioning Forms 107
To Next Page
Loading...
