EasyManuals Logo

Vespa LX 125 3V ie User Manual

Vespa LX 125 3V ie
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
01_11
Start-up button (01_11)
To start the engine, pull either of the two brake levers and then push the button «L».
The vehicle is equipped with special starter procedure management. The starter motor
remains active until the engine starts even if switch «L» is released.
Keep one of the two brakes operated (front or rear) so as to not interrupt the starter
procedure.
The throttle grip must remain in the minimum position, because any other position
inhibits the vehicle starter.
The starter motor will remain active for a maximum of 5 consecutive seconds.
The immobilizer system
In order to enhance theft protection, the vehicle is equipped with a «PIAGGIO IMMO-
BILIZER » electronic engine locking device that is activated automatically when the
ignition key is removed. Upon start-up, the «PIAGGIO IMMOBILIZER» system checks
the starter key, and only if this key is recognised will the Immobiliser system allow the
vehicle to be started.
Keys (01_12)
CAUTION
THE FOLLOWING INFORMATION REFER TO THE VERSION EQUIPPED WITH
PIAGGIO IMMOBILIZER SYSTEM.
16
1 Vehicle

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vespa LX 125 3V ie and is the answer not in the manual?

Vespa LX 125 3V ie Specifications

General IconGeneral
BrandVespa
ModelLX 125 3V ie
CategoryScooter
LanguageEnglish

Related product manuals