EasyManuals Logo

Vespa LXV 125 3V ie 2013 User Manual

Vespa LXV 125 3V ie 2013
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
TYRE INFLATION PRESSURE
Front tyre pressure 1.6 bar
Rear tyre pressure (with
passenger)
2.0 bar (2.3 bar)
TYRES
Front tyre Tubeless, 110/70 - 11'' 45L
Rear tyre Tubeless, 120/70 - 10'' 54L
02_04
Shock absorbers adjustment (02_04, 02_05)
The preloading of the spring can be adjusted to 4 positions using the ring nut located
in the lower part of the shock absorbers and the specific spanner supplied.
Position 1: minimum preload: rider only
Position 2 medium preloading: rider only
Position 3 medium preloading: rider and passenger
Position 4: maximum preloading: rider, passenger, and luggage.
In order to carry out this operation you will need to use the specific spanner in the kit.
Spring preloading increases by turning the ring nut towards «A», but decreases if the
ring nut is turned towards «B».
26
2 Use

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vespa LXV 125 3V ie 2013 and is the answer not in the manual?

Vespa LXV 125 3V ie 2013 Specifications

General IconGeneral
BrandVespa
ModelLXV 125 3V ie 2013
CategoryScooter
LanguageEnglish

Related product manuals