Need help?Do you have a question about the Vetus M2.18 and is the answer not in the manual?
Explains warning symbols and their meanings for safe operation.
Details precautions to prevent fires and explosions during operation and refueling.
Outlines measures to avoid physical harm from engine parts and operations.
Provides guidance on how to react to sudden engine stops or malfunctions.
Explains how to fill the cooling system with coolant, including intercooling and keel cooling.
Guides on performing an initial test run of the engine.
Details the procedures for starting the engine using the control panel and pre-heating.
Importance of maintenance and the maintenance schedule.
Provides step-by-step instructions for checking and topping up engine oil.
Details how to check and top up the coolant level in the cooling system.
Details the process for changing engine oil and oil filter.
Details fuel filter replacement and fuel lift pump cleaning.
Guides on raw water pump inspection and coolant replacement.
Provides general guidance and a table for identifying engine faults.
Addresses problems with engine cranking, starting, and running unevenly.
Diagnoses issues related to maximum RPM, overheating, and cylinder performance.
Troubleshoots low oil pressure and excessive oil consumption.
Addresses fuel consumption and different types of exhaust smoke.
To Next Page
General
