Need help?Do you have a question about the Vetus M2.13 and is the answer not in the manual?
Provides procedures to avoid fire and explosion hazards during operation.
Guidelines to prevent cuts, burns, and other physical injuries.
Procedures for filling engine oil and gearbox oil.
Steps for filling the intercooled cooling system.
Steps for filling the keel cooling system.
Filling coolant systems with a water heater connection (two methods).
Performing initial engine tests and a sea trial for verification.
Guidelines for the initial 50 hours to ensure engine longevity.
Step-by-step guide to start the engine using the control panel.
Procedure for checking the engine's oil level.
Procedure for checking the engine's coolant level.
Draining water from the fuel system and bleeding.
Steps for changing engine oil and replacing the oil filter.
Procedures for draining and refilling the engine's cooling system.
Procedures for long-term storage to prevent damage.
Causes of faults and general guidance for diagnosis.
Lists common faults, their possible causes, and remedies.
Detailed technical specifications for various engine models.
To Next Page
General
