67
6 Maintenance
Bleeding, after fuel lter replacement
Every 500 operating hours.
30 Bleeding
• After replacing the fuel lter the air has to
be bled from the fuel system.
• For bleeding see page 45.
31 Start the engine
• Operate the starter switch until the engine
res; release the starter switch if the engine
does not re within 20 seconds.
Wait until the starter motor has stopped
before making a new attempt to start the
engine.
• Repeat the above if the engine cuts out af-
ter a short time.
• Check for leaks once more.
VD00109
To Next Page
Loading...
