EasyManua.ls Logo

Vetus M2.13 - Stopping Procedure

Vetus M2.13
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Neutraal
43
5 Use
Stopping
17 Stopping on the engine itself
On the engine itself stopping is possible by
pressing the black button on the fuel injection
pump.
If the fuel supply is not shut o by the electri-
cally
operated fuel solenoid stopping of the
engine can be done this way.
VD00986
VD02045
VD00106
16 Stopping
Reduce engine speed to idle and shift the
gearbox to ‘Neutral’.
Turn the key entirely to the left, through
the ‘
oFF position.
When the engine has stopped, turn the key
to the ‘oFF position.
note
Never stop the engine immediately after it has
been in operation for a long time. Allow the
engine to idle for a few minutes before stop-
ping.
note
If the engine is not to be used for some time,
it is recommended that the sea cock is closed
and the battery main switch turned o.

Table of Contents

Related product manuals