Vetus M2.13 - Checking the Starter Motor and Alternator

85
6 Maintenance
Checking the starter motor and alternator
Every 1000 operating hours.
67 Checking the starter motor
• Check for visible defects.
• Check whether the Bendix engages with
the starter ring when the starter motor is
activated. If the Bendix does not engage
properly, contact your Vetus dealer.
68 Checking the alternator
• Check for visible defects.
• Remove the alternator belt. Turn the pulley
by hand to check whether the alternator
can be turned easily. If this is not the case,
contact your Vetus dealer.
VD00992 VD00991 VD02048
• If a spring starter is installed then check
functioning by starting the engine as de-
scribed on pages 38 and 39.