1.Be lack of water.
2.The water screen at
the bottom of water
reservoir is blocked.
3.Pump malfunction.
4.There is foreign
objects blocked the float
of water reservoir.
1. Stop making ice, refill water
and then press “ON/OFF” key
to restart ice-making cycle.
2. Remove the water screen
at the bottom for cleaning.
3. Send it to the authorized
department for repair.
4. Check the foreign objects
and restart the appliance.
1. Ice basket is full.
2. Malfunction of
infrared ray.
1. Remove the ice from ice
basket and then press
“ON/OFF” key to restart the
ice-making cycle.
2. The sensor is damaged,
please send it to the
authorized department for
repair.
The ice-making
assembly is defrosting.
No need to deal with it, the
appliance will deal with it
automatically, and it will return
to normal operation after
about 30-45 minutes.
Alternatively, you can hold and
press the "Clean" key for 3
seconds, and then press the
"ON /OFF" key again to restart
the appliance after the
cleaning procedure is finished.
To Next Page
Loading...
