VEVOR IM1102-UL - Technical Parameters

- 11 -
flashes
flashes
The ice-making
assembly is frozen.
No need to deal with it. Under
this condition, let the
appliance be defrosted
automatically for about 20
minutes, at that time, the
press keys can not be
operated. The appliance can
be used again after the
defrosting is finished. If this
problem occurs repeatedly, it
can be considered as
refrigerant leakage. Please
send the appliance to the
authorized department for
maintenance.
Poor ice-making
result. The
ice-making
process is normal
but the ice
produced is
broken, which lasts
for more than 2
hours.
1. Poor heat dissipation.
2. The water
temperature is too high.
3. The ambient
temperature is too high.
4. The ice-making
system is abnormal.
1. Leave a 15cm clearance on
all sides of the ice maker for
proper ventilation.
2. Fill the water reservoir with
water ranges between 8℃ and
28℃
3. Operate the ice maker at a
environment with an ambient
temperature between 10℃
and 32℃.
4. Call customer service.
TECHNICAL PARAMETERS
Model: IM1102-UL
Ice Production: 28 Ibs/day