Chapter 3
46
PS2KB Wakeup Select
When select
Password
, please press Page Up or Page Down key to
change
Password
, 8 characters maximum. Please note that PS2MS
Wakeup from suspend and PS2KB Wakeup from suspend will be disabled
while changing the password. Settings:
Hot key
and
Password
PS2KB Wakeup from suspend
Select which Hot-Key to wake-up the system from power saving mode.
Settings:
Disabled, Ctrl+F1, Ctrl+F2, Ctrl+F3, Ctrl+F4, Ctrl+F5, Ctrl+F6,
Ctrl+F7, Ctrl+F8, Ctrl+F9, Ctrl+F10, Ctrl+F11, Ctrl+F12, Power, Wake
and
Any Key
USB Resume
Decide whether or not USB devices can wake the system from suspend
state. Settings:
Disabled
and
Enabled
PowerOn by PCI Card
Decide whether or not any PCI card can power up the system or resume
from suspend state. Such PCI cards include LAN, onboard USB ports, etc.
Settings:
Disabled
and
Enabled
Wake On LAN/Ring Connector
Decide whether or not any Ring-In signals from the modem can wake up
the system or resume from suspend state. Settings:
Disabled
and
Enabled
RTC Alarm Resume
The field is used to enable or disable the feature of booting up the
system on a scheduled time/date. Settings:
Disabled
and
Enabled
Date (of Month)
This field can only be set if RTC Alarm Resume is enabled. The field
specifies the date for
RTC Alarm Resume.
Resume Time (hh:mm:ss)
This field can only be set if RTC Alarm Resume is enabled. The field
specifies the time for
RTC Alarm Resume.
To Next Page
Loading...
Need help?
General
