49
4-1 VIA 4 IN 1 Install VIA Service Pack 4 IN 1 Driver
* The path of the file is X:\VIA\DRIVER\SETUP.EXE
IDE : VIA ATAPI VENDOR SUPPORT DRIVER IS USED TO FIXED COMPATIBILITY
ISSUE FOR IDE DEVICES
AGPVXD : VIA AGPVXD DRIVER IS TO BE INSTALLED, IF YOU ARE USING AN AGP
VGA CARD, VIAGART.VXD WILL PROVIDE SERVICE ROUTINES TO YOUR
VGA DRIVER AND INTERFACE DIRECTLY TO HARDWARE, PROVIDING FAST
GRAPHIC ACCESS
IRQ ROUTING : VIA PCI IRQ MINIPORT DRIVER IS TO BE INSTALLED UNDER WIN98 ONLY,
IT WILL FIX PCI IRQ ROUTING SEQUENCE
INF : VIA REGISTRY DRIVER IS TO BE INSTALLED UNDER WINDOWS
THE DRIVER WILL ENABLE VIA POWER MANAGERMENT CONTROLLER
1. Click IDE when MAGIC INSTALL MENU
appears
2. Click NEXT when VIA Service Pack Wizard
appears
3. This is to announce the Copy Right, click Yes 4. Click NEXT to Normal Installation
5. Click NEXT to VIA INF Driver 2.30A 6. Click Finish to restart computer
To Next Page
Loading...
Need help?
General
