IPScan Probe 600 User’s Guide
12
2.2. System
You can configure the Password and communication interval for each Ethernet Port.
Step1
Select 1. [System] from [Main Menu].
Main Menu Select a number : 1
Step2
System
1. Password
2. Ethernet Port 1
3. Ethernet Port 2
4. Ethernet Port 3
5. Ethernet Port 4
6. Ethernet Port 5
7. Ethernet Port 6
0. Main Menu
The [System] menu is shown. You can configure the values for each Ethernet Port.
2.2.1. Password
Factory released probe contains no password. However, it is highly recommended to assign a
password to prevent misusage. You can assign and modify password by selecting [7] from
[System] menu.
Step1
Select 1. [Password] from [System].
System setting. Select a number : 7
Step2
The password should contain less than 15 characters. It can be a combination of
numbers, alphabets and/or symbols.
Enter a new password : ********
Confirm the password : ********
If you have forgotten the password, please contact your sales representative.
To Next Page
Loading...