Viascope ipscan probe 600 - Page 19

IPScan Probe 600 User’s Guide
19
b. Using Multi Ethernet Ports
Assign Ethernet Port 1 as the Master Port, and other Ports are for gathering information and
send it to the Ethernet Port1 (Master Port).
Define [0] or [1] to assign Ethernet
Port 1 as a Master Port.
Define [1] to assign Ethernet Port 1
as a Master Port, and other network
configuration should be [0] since if
you define the network configuration,
this Port will communicate with the
Server. Thus for gathering and
Monitoring, just define [0].
Ethernet Port 1
1. IP
2. Netmask
3. Gateway
4. Master Server IP
5. Secondary Server IP
6. VLAN ID
7. Master Port
8. Speed
9. Main Menu
MAC Address
[192.168.101.20]
[255.255.255.0]
[192.168.101.1]
[192.168.103.10]
[0.0.0.0]
[0]
[0]
[Auto]
[00:03:2e-05:02:77]
Ethernet Port 2 or others
1. IP
2. Netmask
3. Gateway
4. Master Server IP
5. Secondary Server IP
6. VLAN ID
7. Master Port
8. Speed
0. Main Menu
MAC Address
[0.0.0.0]
[0.0.0.0]
[0.0.0.0]
[0.0.0.0]
[0.0.0.0]
[0]
[1]
[Auto]
[00:03:2e-05:02:78]
①
②