11
3.3 Teach-in of a second dual
drive
The radio remote control VFF/CDL-CF-
15 can operate two dual drives
simultaneously (Parallel function).
For this purpose, a teach-in process for
the second dual drive must be carried
out.
After you carried out the teach-in
process for the first dual drive (see
page 10), you carry out the following
process for the second dual drive:
• Press the buttons and on the 1 2
radio remote control at the same
time and keep them pressed for
approx. 3 seconds until the status
LED s starts flashing.
• Release the buttons now.
• The status LED and the keypad s
illumination flash alternately.
• Press button on the second dual l
drive for approx. 1 s.
• The back adjustment motor moves
briefly up/down.
• The status LED goes off, the s
keypad illumination lights up
constantly.
• The teach-in process has been
completed successfully.
Commissioning
To Next Page
Loading...
Need help?
General
