15
Reset to factory settings
LED
5 Reset to factory
settings
Resetting the remote control:
• Simultaneously press and hold the
buttons , and or , and 1 3 5 2 4
6.
• The status LED starts flashing.s
• When the status LED is steady, s
release the buttons.
• The status LED goes off, the s
remote control is reset.
Resetting the double drive:
• Press button on the double drive l
for approx. 10 s.
• The drive for the leg adjustment
moves briefly to confirm a reset to
the factory settings.
• Remove the plug from the mains
socket and wait until the green LED
on the power supply goes off.
• Then reconnect the mains plug.
• The double drive is now returned to
its default settings.
PLEASE NOTE:
After resetting the double drive to the
factory settings, the pairings of remote
controls and Apps are removed, the
pairing process has to be carried out
again.
To Next Page
Loading...
Need help?
General
