Why is my Vicon KM 4000 mower unstable in the lifted position?
If your Vicon Farm Equipment mower is unstable when lifted, it may be because the driving speed is too high. Avoid sharp turns and lower your speed.
What causes excessive cutter bar wear on Vicon KM 4000 Farm Equipment?
Excessive cutter bar wear on Vicon Farm Equipment can be caused by ground pressure being too high. Correct the ground pressure to the appropriate level.
General| Brand | Vicon |
|---|---|
| Model | KM 4000 |
| Category | Farm Equipment |
| Language | English |
Overview of mower features and guidance on using the manual for operation and maintenance.
Comprehensive safety instructions, PTO/coupling shaft safety, tyre safety, and danger sticker explanations.
Step-by-step instructions for assembling KM 2800, 3200, 4000, and 4000S models, including specific and general steps.
Adjusting transport width, tractor preparation, hydraulic connection, and attaching the mower.
Mounting and shortening coupling shafts, and adjusting the mower's cutting height.
Setting ground pressure, mowing stony fields, using wide inserts, and general mowing directions.
Guidance on mowing speeds, techniques, and critical safety warnings regarding the drawbar cylinder.
Procedures for moving the mower between transport and operating positions for different models.
Instructions for safe transport, parking, and related precautions like speed limits and wheel chocks.
Lubrication schedules, blade inspection/exchange, and bolt tightening procedures.
Procedures for checking and changing gearbox and cutter bar oil, and managing the hydraulic system.
Torque values for fasteners and a guide to diagnosing and resolving common mower problems.
To Next Page
