Vicon Valkyrie Quick Start Guide
15 Dec 2022, Revision 1
Install and license the Vicon application software
Obtain the required software installer from
Vicon.
The Vicon software installer enables optional
installation of the License Server software for server-
based licensing, and the dongle drivers for licenses
that are locked to dongles.
For detailed instructions on how to install your
Vicon application software and use Vicon product
licensing, see your Vicon software documentation
(PDF or online help).
If you are prompted to restart your PC, do so as
soon as possible.
Start the software
On your Windows desktop, double-click the
shortcut for the required
Vicon software.
If this is the first time you have used your Vicon
application software on this PC, a dialog box may be
displayed, enabling you to specify the license server.
In the System panel, make sure all of the
cameras in your system are listed.
Ensure that at the top left of the screen the
system is shown as live and connected.
Position the cameras
In the System panel, select a camera.
Change the view to Camera view.
Aim the camera so that it points where required,
usually the center of the capture volume.
Repeat the process for each camera.
The heat map image (right) shows camera coverage
of a capture volume.
Video Preview mode: Valkyrie's Video Preview mode helps you position the cameras by displaying
the volume in video mode.
To use Video Preview mode, in the System panel, select the relevant camera, right-click, point to
Video Preview Mode and then select the required option.
To Next Page
Loading...