English
23
When Main Switch in Activate position, Power-PLUS provides
different protection Coverage based on your Mode Switch
setting.
Timer Mode Coverage:
Power-PLUS provides low-Voltage protection, over-temperature
protection, and time countdown at the same time while car
parking. If any parameter reach the threshold value of these 3
protection, Power-PLUS will auto cut-off power output to Dash
Cam/Car DVR.
Normal Mode Coverage:
Power-PLUS provides low-Voltage protection and
over-temperature protection at the same time while car parking.
If any parameter reach the threshold value of these 2
protection, Power-PLUS will auto cut-off power output to Dash
Cam/Car DVR.
About Low-Voltage, Timer and
Over-Temperature Protection
Coverage:
Hour Setting determines the time-out schedule while you switch into Timer
Mode. Power-PLUS will cut off power output based on countdown from engine
off.
Default setting is 6 hours, and if you select the mode switch into Timer Mode,
Power-PLUS will cut off power output after 6 hours of engine-off (ACC off),
OR Car Battery voltage reach the cut-off threshold, OR environment
temperature exceed setup value.
You may select 2/6/12/24/48/72 hours.
Power-PLUS display shows up “TIME” for indicating power output cut-off
based on timer countdown finished.
To Next Page