English
05
What Vico-Power PLUS can do?
How it works?
Vico Power-PLUS
Your Smart Car-Battery Power Management Device!
Power-PLUS is a power management device connecting to car
battery which working with Dash Cam/Blackbox DVR,
continuously providing power after engine-off while parking, and
monitoring your battery status. Power-PLUS detects car battery
status to cut-off power to prevent car battery from being drained
out (discharged).
Together working with Vicovation Smart Parking Mode function,
your Marcus Dash Cam will enter motion-detection/G-sensor
trigger recording after 10mins you left the car, for full parking
protection. Unusual events in front of your car will be recorded by
motion-detection triggering.
If any unexpected impact occurs, recording can be also triggered
by G-Sensor. If there is no motion detection/G-Sensor triggering,
Dash Cam stays in standby to save memory space.
Dash Cam will come back to normal recording mode while you
start moving your vehicle again (G-Sensor detected). You get full
surveillance protection while driving and car parking.
Power-PLUS provides multiple protection to have better safety
coverage, including:
1. Low Voltage protection
2. Over Temperature protection
3. Timer protection
4. Over Current/Surge protection
To Next Page
Loading...