LED display when engine off
(Main Switch under Activate)
After 3 seconds, LED display will enter sleeping mode, only
cross-blinking last 2 dots (decimal point at bottom side)
repeatedly, shown as below.
Normal Mode
After engine off (ACC off), Power-PLUS LED display will show
BATT (Battery Power) for 3 seconds.
Timer Mode
After engine off (ACC off), Power-PLUS LED display will show
BATT (Battery Power) for 3 seconds.
After 3 seconds, LED display will enter sleeping mode, only
cross-blinking semicolon 2 dots (in center part) repeatedly,
shown as below.
English
26