English
25
ACC Restore Reboot Function:
Activate the ACC Restore Reboot function will reboot
Power-PLUS output for Dash Cam-rebooting when ACC status
turn-on from ACC-off. Power-PLUS keep providing power
output to Dash Cam while ACC turns into OFF (engine off).
When ACC turns ON (engine ON), Power-PLUS is able to
program for power reboot or not.
Default setting is “Act.” (Activate):
Power-PLUS’s Power output to Dash Cam will reboot while
engine (ACC) restart, leading Marcus Car DVR reboot itself due
to power on-> off ->on.
If you set into “Off”:
Power-PLUS will keep providing power continuously no matter
ACC on/off switching. Marcus Car DVR stays turn on, no
rebooting if ACC back to ON.
Suggestion:
Activation of this function is recommended. Initializing/rebooting
Dash Cam every time you coming back to vehicle allows Dash
Cam to have initial checking while boot up. Users may also
have better notification with Dash Cam status with booting
sounds and error message appearing if any, for having better
awareness of Marcus status.
ACC Restore Reboot Function Detail
To Next Page
Loading...