English
03
Attention & Precaution
Power Plus is a power safety device which connects to car
battery to work with Dash Cam/Black Box, continuously
providing power after engine-off while parking, and monitoring
your battery status.
Please refer to professional assistance of vehicle original
manufacturer/maintenance if you are not able to install by
yourself. Vicovation takes no responsibility for incorrect wiring
malfunctions by user’s mistake/carelessness, or any other
damages due to incorrect installing/wiring.
Before installing Vico Power-PLUS, please make sure the
correct relative pin connection of your car fuse box. Power pin
contacts definition might be different depending on different
vehicles (Battery+/ACC+/GND).
While installing, please be sure to turn off the ignition/engine, to
switch your key to “off” position, and take the key out to ensure
the power is completely off.
After correct installation and wiring, please also check the other
electrical equipment are all in normal operation. Incorrect
installation (like short-circuit) might lead to damage, fire,
electrical shock or traffic accidents.
The state of vehicle may affect the performance of the product.
Vicovation is not responsible for any install/uninstall costs of the
product, regardless the product warranty status.
Don’t change any fuse to which is not the original rated capacity.
Otherwise, a danger of fire exists.
Car Battery efficiency may be in big different due to environment
(temperature sensitive). Dash Cam operation status may not be
constant due to battery performance and external temperature.
Vicovation takes no responsibility for car battery life
time/warranty.
1.
2.
3.
4.
5.
6.
7.
8.
9.
To Next Page
Loading...