To Next PageTo Next Page
Need help?Do you have a question about the Vicovation Vico Power-Plus and is the answer not in the manual?
General| Brand | Vicovation |
|---|---|
| Model | Vico Power-Plus |
| Category | Automobile Accessories |
| Language | English |
Explains the device's role in providing continuous power and monitoring battery status.
Lists low voltage, over-temperature, timer, and over-current/surge protections.
Protects car battery by cutting off power when voltage drops below a configured threshold.
Cuts off power if internal temperature exceeds the set value to prevent damage.
Cuts off power when a scheduled time limit is reached, based on user setup.
Detects abnormal current and cuts power to prevent device damage, with extra fuse protection.
Compatible with Vicovation and other car cams with standard cigar charger power.
Auto-detects 12V or 24V car battery input for programmable menu settings.
Switch between Normal mode and Timer mode for different parking protection needs.
Allows users to select cut-off voltage, temperature, and time parameters.
Selects power output based on parking environment or situation.
Diagram showing connections: Battery+, ACC, GND, Cigar Socket, Fuse, and control buttons.
Engine off, switch to Bypass, locate fuse box, and check charts.
Information on using Add-A-Circuit kits for fuse block connections.
Connect the red wire to the ACC+ fuse, ensuring no short-circuit.
Connect the yellow wire to the Battery+ fuse, ensuring no short-circuit.
Connect the black wire to a proper chassis ground point, verifying with a multimeter.
Activate switch, check display, calibrate voltage, connect dash cam, check systems.
Configure menu settings and ensure optimal unit placement.
Configure low voltage cut-off, timer duration, and over-temperature thresholds.
Adjust voltage offset for accuracy and configure ACC restore reboot function.
Explains how to set the low voltage cut-off threshold based on car battery condition.
Details how the timer countdown determines power cut-off after engine shutdown.
Explains how to set the over-temperature cut-off threshold based on ambient conditions.
Describes the combined protection coverage in Timer and Normal modes.
Detailed steps and examples for calibrating voltage readings using a multimeter.
Explains the ACC restore reboot function and its settings for device restart.
Describes the LED screen indicators in Timer and Normal modes when the engine is off.
Explains the functionality of the Activate and Bypass main switch settings.
