English
17
STEP 11. Configure Power-PLUS menu settings:
You may check the following instruction for more
detail and configure your Power-PLUS setting.
STEP 12. Power-PLUS is built-in with thermo
sensor, providing over-temperature cut-off
protection. Please avoid direct sunlight of
Power-PLUS placement. Do NOT place it on the front
dashboard or any spot of direct sunlight. Direct
sunlight heating might lead to electronic component
failure, or abnormal function/failure by incorrect
measurement.
For drive safety, please avoid any view-block while
installing Power-PLUS. And avoid any place where
might affect your driving control/handling/breaks.
Power-PLUS
Install
Position
To Next Page
Loading...