English
27
Activate
When main switch stays in “Activate”, Power-PLUS function
turns on.
While engine on (ACC ON), Power-PLUS provides power to
Dash Cam/Car DVR. While engine off, Power-PLUS keeps
providing power to Dash Cam/Car DVR for Smart Parking Mode
(Power from Car Battery), and also monitoring your car battery
status (Low Voltage protection) and environment temperature
(Over Temperature protection), or Timer cut-off countdown if
you switch Normal/Timer mode switch into Timer Mode.
Bypass
When main switch change to “Bypass”, Power-PLUS function
turns off.
While engine on (ACC ON), Power-PLUS still provides power to
Dash Cam/Car DVR.
While engine off, Power-PLUS stops providing power output.
Dash Cam/Car DVR turns off.
If you will leave your car parking for a long period (over 7 days),
we recommend you to switch into Bypass, or you may setup
Timer mode for limited hours operation.
Main Switch (Activate/Bypass)
Function Detail
To Next Page
Loading...