6000counts Pocket Clamp Multimeter
1. Overview
This is a pocket-sized 3 5/6-digit automatic digital meter. It has stable performance, high precision, high reliability, clear reading and overload
protection. Driven by AAA 1.5V battery, the instrument adopts large screen LCD display and adopts boost power supply. Even at the edge of 2.3V low
battery, it can ensure the high brightness of backlight and flashlight. The meter is easy to carry and is very popular among users. The instrument's
backlight can be turned on and off automatically after 15 seconds. This series of instruments can be used to measure DC voltage and AC voltage, AC
current 600A, resistance, capacitance, diode, temperature, continuity test, square wave output, frequency measurement and true RMS. It is a superior
tool and an ideal tool for laboratories, factories, radio enthusiasts and families.
2. Safety Precautions
This series of instruments is designed in accordance with IEC1010 (Safety Standards promulgated by the International Electrotechnical Commission),
please read the safety precautions before use.
1. When measuring voltage, do not input a limit voltage exceeding the effective value of DC 1000V or AC 750V;
2. The voltage below 36V of the current file is a safe voltage, when measuring AC voltage higher than 36V DC and 25V AC, check whether the test
leads are in reliable contact, whether they are connected correctly, whether they are well insulated, etc., to avoid electric shock;
3. When changing functions and ranges, the test pen should leave the test point;
4. Select the proper function and range, beware of wrong operation, although the series of instruments with a full-range protection, but for safety
reasons, you still pay more attention;
5．Safety Symbol Description: “ ”Exist dangerous voltage，“ ” Ground ，“ ” Double insulation， “ ”Operator must
refer to the instruction manual，“ ”Low voltage symbol.
3. Characteristics
1. General Characteristics
1-1. Display: liquid crystal display (LCD)；
1-2. Maximum display: 5999 (3 5/6) bit automatic polarity display;
1-3. Measurement method: double integral A/D conversion;
1-4. Sampling rate: about 3 times per second;
1-5. Over range display: The highest position shows “OL”;
1-6. Low voltage display：“ ”symbol appears；
1-7. Working environment：(0～40)℃，relative humidity＜80%；
1-8. Power: AAA 1.5V battery;
1-9. Volume (size): 176×67×33mm (L×W×H)；
1-10. Weight：about300g（including 1.5V battery）；
To Next Page
Loading...
Need help?
General
