Victor DC300 User Manual

1
Need Help? Watch the video at www.victortech.com/High-Rise
High Rise™Sit-Stand
Desk Converter
Assembly Instructions for Model DC300
PRE-ASSEMBLY
• Please read all instructions before beginning assembly. We strongly recommend
you watch the video at www.victortech.com/High-Rise.
• Remove all parts and hardware from box and lay out on a scratch-free work surface,
as this will avoid damaging any parts during assembly.
• Do not dispose of any contents or packaging material until assembly is complete.
This will help to avoid accidentally discarding small parts or hardware.
• For your safety and ease, adult assembly by two people is recommended.
• Use the parts and hardware lists to identify and separate each of the pieces included
prior to starting assembly.
• Do not use power tools. Use only the included Hex Keys. Power tools can damage
hardware and split wood.
Patent
Pending

Victor DC300 Specifications

General

Brand	Victor
Model	DC300
Category	Indoor Furnishing
Language	English

Summary

Pre-Assembly Instructions

Review Instructions and Video

Read all instructions and strongly recommended to watch the assembly video at www.victortech.com/High-Rise.

Prepare Workspace and Unpack Parts

Remove all parts and hardware from the box and lay them out on a scratch-free work surface.

Retain Packaging Material

Do not dispose of any contents or packaging until assembly is complete to avoid discarding small parts.

Two-Person Assembly Recommended

For safety and ease, adult assembly by two people is recommended.

Identify and Separate Components

Use the parts and hardware lists to identify and separate each piece prior to starting assembly.

Use Included Tools Only

Do not use power tools; use only the included Hex Keys to prevent damage to hardware and wood.

Parts List Overview

Step 1: Remove Retention Straps from the Tower

Step 2: Attach Tower to Steel Base

Step 3: Attach Desk Surface to Tower

Step 4: Attach Upper Cross Bar to Desk Cross Bar

Step 5: Attach Monitor Bracket to Monitor & Tower

Step 6: Adjust the Desk Surface Height

Step 7: Adjust the Monitor Tilt or Height

Step 8: Stabilize the Desk Surface (Optional)

Helpful Tips for Use

Unit Usage Precautions

Do not lean on or overload the unit; doing so may cause tipping or breakage. Do not exceed 20 pounds.

Height Adjustment Requirement

The desk surface or monitor cannot be raised/lowered when the knob is tight; loosen knob to adjust.

Ergonomic Monitor Positioning

Position monitor so eyes are level with the top third, with a slight upward angle for optimal ergonomics.

Ergonomic Desk Surface Height

Set keyboard height to be comfortable, typically slightly below elbow level.

Comfortable Standing Transition

Ease into standing by alternating sitting/standing and wearing comfortable shoes.

Use Anti-Fatigue Mat

Recommend using an anti-fatigue mat for comfort and to protect joints when standing on hard surfaces.