Victoria Arduino ADONIS 3 gruoups

Fig. 21
5554
55
EN
7. pROGRAmminG
7.1 KEY
① LCD Display.
② Technician/waiter key lock.
③
RESET Key: to turn the machine on and
off and to exit menu.
④CURSORI Key: to scroll the menu and
⑤ to increase and
decrease values.
⑥ENTER Key: to access the menu.
LIST OF PROGRAMMABLE FUNCTIONS
AUTO.CLEAN.CYCLE
DOSE PROGRAM.
DELIVERY COUNT
ON-OFF PROGRAM.
CUP-WARMER PRO.
DATE/TIME
GRINDING
HISTORICAL ALARM
MAINTENANCE
LANGUAGE
TEMPERATURE
LIGHT ADJUST
Operation to be carried out EXCLUSIVELY by
a Qualified Technician. Adjustment by NON
qualified technicians can invalidate the guar-
antee.
7.2 PROGRAMMING
To access the programming units, proceed as follows:
 NOTE
The procedure can be carried out with the machine
on.
• InsertthekeymarkedU (see chapter “USE”) in the
provided keyhole.
AUTOMATIC CLEANING CYCLE
(function also available with T visualization key)
• Pressthe key to access program; the display
will read:
AUTO. CLEAN. CYCLE
2 1
3 4 5 6