Victoria Arduino MYTHOS 2 Service Manual

3.6 MYTHOS 2
3.3.1 THE CLUMP CRUSHER
The clump crusher is a plastic device situated into
the dispensing spout.
It allows to optimize the flow of gr
ound coffee so
that the quality present in the filter holder, at the
end of the grinding process, correspond to that show
on the display.
NOTE
The clump crusher is not interchangea-
ble between MYTHOS 1 and MYTHOS 2.
When the clump crusher is replaced, put it over the
metal channel and ensure that:
• The side flaps should embrace the metal channel
of the outside;
• The central flap must be on the front side of the
channel;
• The inner (triangular) flaps must be bent toward
the inside of the channel in order to be appro
xi-
mately flat.
After that:
1 Insert the clump crusher and the channel into
the plastic cover.
2 Place the p
arts on the machine starting from the
crack on the back and pushing it up.
NOTE
The clump crusher will function opti-
mally after it has lost its electrostatic
properties after some deliveries.
16
18
17
19

Victoria Arduino MYTHOS 2 Specifications

General

Brand	Victoria Arduino
Model	MYTHOS 2
Category	Coffee Grinder
Language	English