1.3MYTHOS 2
1.2 SAFETY REGULATIONS
Machine design has taken into account all reason-
able user safety precautions; nevertheless, particu-
lar conditions of installation and/or handling may
create unforeseen situations beyond the installer’s
control which will require case-by-case evaluation of
residual risks. We recommend keeping the following
in mind:
• Always handle the machine with care to avoid the
danger of its falling.
• The packing mat
erials (carton, cellophane, sta-
ples, polystyrene, etc..) c
an cut, wound or create
hazards if used improperly or handled carelessly.
Store such materials out of reach of children and
irresponsible persons.
• This symbol on the appliance or package means
that the appliance must not be considered as
normal household r
efuse but that it must instead
be delivered to an appropriate collection centre
for the recycling of electric and electronic appli-
ances. Make sure that this appliance is disposed
of correctly and you too will be making your
contribution to the prevention of negative effects
on health and the environment, which could
otherwise be caused by inadequate disposal.
Recycling materials helps to preserve our natural
resources. For more information about how to
recycle this product, you can contact your local
council office, local refuse disposal service or the
retailer from whom you purchased the appliance.
2
• Before carrying out any installation or adjust-
ment process, be sure to have read and thorough-
ly understood the warnings in this manual.
• The company cannot be held liable for any dam-
age to people or property r
esulting from failure
to respect the instructions concerning safety,
installation and maintenance contained in this
manual.
• The power cord of this appliance must never be
replaced by the user. In the event of damag
e,
switch off the appliance and only contact profes-
sionally qualified technicians for its replacement.
• Should you decide to no longer use this type
of appliance, we recommend that you mak
e it
inoperative: unplug the appliance from the mains
socket and cut off the power cord.
• All defects and/or anomalous machine behaviour
should be reported immediately t
o authorized
installation and/or maintenance personnel.
• Before connecting the machine, check that elec-
trical power supply corresponds t
o the specifica-
tions on the data plate.
• Should the machine plug not be compatible with
your socket, have the plug r
eplaced with a suit-
able type by a qualified technician, who should
also check that the section of the wires supply-
ing the power outlet is suitable for the machine
power requirements.
• Avoid use of multiple-plug adapters and exten-
sion cords.
• The ground wir
e must be connected; the electri-
cal system must meet the st
andards set by local
safety laws and regulations.
• The machine must be installed only by author-
ized, qualified personnel.
• Check that the machine components have suf
-
fered no damage during shipping; in the c
ase
defects or anomalies are found, interrupt instal-
lation and request replacement.
• Never obstruct the fan grids.
• Never insert objects into the fan grids.
WARNING
Do not touch the heating element
or the upper grinder holder during
machine functioning, as they might
reach high temperatures.
To Next Page
Loading...
Need help?
General