Victory STAR - Preparation (Continued); Advanced Preparation Steps; Installation Options; Option 1: Open Cupboard Installation

Advanced Preparations:
1. Read the entire installation guide and users manual thoroughly, understand instructions and warnings.
2. Be familiar with the controls of the range hood.
3. Place the range hood on a at, stable surface. Connect the range hood to a designated standard outlet
(please refer the product label for the suitable voltage of this unit) and verify no debris has entered the vent
openings, then turn on the range hood.
4. Place all supplied parts and required hardware on a at, stable surface and verify the existence of all sup-
plied parts.
5. Carefully remove the white/blue plastic protective coat from the chimney covers and range hood if any.
Preparations:
NOTE: To avoid damage to your hood, prevent debris from entering the vent opening.
1. Disconnect power cord, remove the stainless steel ba󰀪e lter and grease tunnel.
2. Set aside the stainless steel ba󰀪e lters and grease tunnel until the range hood is properly installed.
OPTION 1: OPEN CUPBOARD
Using mounting brackets and woodblocking, no
trim necessary.
Using woodblocking only. No mounting brackets.
Install with trim. (Page 19 for details)
OPTION 2: CLOSED BOX
VICTORY range hoods
| STAR
12
VICTORY range hoods
STAR |
13
PREPARATION
(
Continued
)
INSTALLATION OPTIONS